Search in Category
Search Filters
-
Cobalt x
Filter Your Search
Application Angle
Basic standard group (BSG)
Coating
Country of origin
Cutting diameter - inch (DC)
Cutting diameter - millimeter (DC)
Diameter
Hand (Cutting direction)
K - Cast Iron(castings of iron and carbon alloys with > 2% carbon content)
Length
Length chip flute - fractional inch (LCF)
Length of Cut
M - Stainless steel(corrosion resistant steels with = 11% chromium content)
Material Application Priority
Material code (BMC)
N - Non-ferrous metals(metals including alloys without an appreciable amount of iron)
Shop by Category
Jobber Drills | Lowry Supply
R10CO5/16 Jobber Drill
Jobber length drill with straight shank, diameter 0.3125” (5/16) with an overall length of 4.1/2” and flute length of 3.3/16” according to NAS907 Type J standard with 135° heavy duty split point, cobalt based HSS-E with bronze finish for 4xD drilling without pecking in steel, stainless steel, cast iron and super-alloy
Jobber Drill
R18CON29 Jobber Drill
Jobber length drill with straight shank, diameter 0.1360” (N29) with an overall length of 2.7/8” and flute length of 1.3/4” according to NAS907 Type J standard with 135° heavy duty split point, cobalt based HSS-E with bronze finish for 4xD drilling without pecking in steel, stainless steel, cast iron and super-alloy
Jobber Drill
R10CO1/2 Jobber Drill
Jobber length drill with straight shank, diameter 0.5000” (1/2) with an overall length of 6” and flute length of 4.1/2” according to NAS907 Type J standard with 135° heavy duty split point, cobalt based HSS-E with bronze finish for 4xD drilling without pecking in steel, stainless steel, cast iron and super-alloy
Jobber Drill
R10CO3/16 Jobber Drill
Jobber length drill with straight shank, diameter 0.1875” (3/16) with an overall length of 3.1/2” and flute length of 2.5/16” according to NAS907 Type J standard with 135° heavy duty split point, cobalt based HSS-E with bronze finish for 4xD drilling without pecking in steel, stainless steel, cast iron and super-alloy
Jobber Drill
R10CO3/8 Jobber Drill
Jobber length drill with straight shank, diameter 0.3750” (3/8) with an overall length of 5” and flute length of 3.5/8” according to NAS907 Type J standard with 135° heavy duty split point, cobalt based HSS-E with bronze finish for 4xD drilling without pecking in steel, stainless steel, cast iron and super-alloy
Jobber Drill
R10CO3/32 Jobber Drill
Jobber length drill with straight shank, diameter 0.0938” (3/32) with an overall length of 2.1/4” and flute length of 1.1/4” according to NAS907 Type J standard with 135° heavy duty split point, cobalt based HSS-E with bronze finish for 4xD drilling without pecking in steel, stainless steel, cast iron and super-alloy
Jobber Drill
R10CO1/16 Jobber Drill
Jobber length drill with straight shank, diameter 0.0625” (1/16) with an overall length of 1.7/8” and flute length of 7/8” according to NAS907 Type J standard with 135° heavy duty split point, cobalt based HSS-E with bronze finish for 4xD drilling without pecking in steel, stainless steel, cast iron and super-alloy
Jobber Drill
