Search in Category
Filter Your Search
Shop by Category
Carbide and HSS-E Threadforming Fluteless Taps
33005/16X18H5NO3 UNC Roll Form Tap
Thread forming tap with lube grooves NO3 with a 2-3xP semi-bottoming lead, for Unified National Coarse thread UNC 5/16” with 18 TPI and 2B class of fit with H5 pitch diameter limits, dimensions according to ANSI standard with 0.3180” shank and 0.2380” square drive, HSS with bright finish for 3xD through or blind hole threading in free machining, plain carbon and alloy steel and wrought or cast aluminium and copper or copper alloys
UNC Roll Form Tap
33001/4X20H4NO3 UNC Roll Form Tap
Thread forming tap with lube grooves NO3 with a 2-3xP semi-bottoming lead, for Unified National Coarse thread UNC 1/4” with 20 TPI and H4 pitch diameter limits, dimensions according to ANSI standard with 0.2550” shank and 0.1910” square drive, HSS with bright finish for 3xD through or blind hole threading in free machining, plain carbon and alloy steel and wrought or cast aluminium and copper or copper alloys
UNC Roll Form Tap
33003/8X16H5NO3 UNC Roll Form Tap
Thread forming tap with lube grooves NO3 with a 2-3xP semi-bottoming lead, for Unified National Coarse thread UNC 3/8” with 16 TPI and 2B class of fit with H5 pitch diameter limits, dimensions according to ANSI standard with 0.3810” shank and 0.2860” square drive, HSS with bright finish for 3xD through or blind hole threading in free machining, plain carbon and alloy steel and wrought or cast aluminium and copper or copper alloys
UNC Roll Form Tap
33003/8X16H5NO2 UNC Roll Form Tap
Thread forming tap with lube grooves NO2 with a 4-6xP plug lead, for Unified National Coarse thread UNC 3/8” with 16 TPI and 2B class of fit with H5 pitch diameter limits, dimensions according to ANSI standard with 0.3810” shank and 0.2860” square drive, HSS with bright finish for 3xD through or blind hole threading in free machining, plain carbon and alloy steel and wrought or cast aluminium and copper or copper alloys
UNC Roll Form Tap
3306E10-24X4H4 UNC Extension Roll Form Tap
Thread forming tap with lube grooves with a 1-2xP bottoming lead, for Unified National Coarse thread UNC 10 with 24 TPI and H4 pitch diameter limits, dimensions according to ANSI standard with 0.1940” shank and 0.1520” square drive, HSS with bright finish for 2.5xD through or blind hole threading in free machining, plain carbon and alloy steel and wrought or cast aluminium and copper or copper alloys
UNC Extension Roll Form Tap