Search in Category
Filter Your Search
Application Angle
Basic standard group (BSG)
Box height millimeter
Box length millimeter
Box width millimeter
Coating
Country of origin
Cutting diameter - inch (DC)
Cutting diameter - millimeter (DC)
Gross weight - grams
Hand (Cutting direction)
K - Cast Iron(castings of iron and carbon alloys with > 2% carbon content)
Length chip flute - fractional inch (LCF)
M - Stainless steel(corrosion resistant steels with = 11% chromium content)
Material Application Priority
Material code (BMC)
N - Non-ferrous metals(metals including alloys without an appreciable amount of iron)
Overall length - millimeter (OAL)
Overall length - fractional inch (OAL)
Overall length - inch (OAL)
P - Steel and cast steel(steels with alloy content = 10% and a hardness of < 45HRC)
Point Angle (SIG)
Product measurement standard
Product short description
Shank
Shop by Category
Screw Machine Drills | Lowry Supply
M41CON56 Stub Drill
Stub length drill with straight shank, diameter 0.0465” (N56) with an overall length of 1.3/8” and flute length of 1/2” according to ANSI standard with 135° split point, cobalt based HSS-E with bronze finish for 2.5xD drilling without pecking in steel, stainless steel, cast iron and super-alloy
Stub Drill
M41CON7 Stub Drill
Stub length drill with straight shank, diameter 0.2010” (N7) with an overall length of 2.1/4” and flute length of 1.3/16” according to ANSI standard with 135° split point, cobalt based HSS-E with bronze finish for 2.5xD drilling without pecking in steel, stainless steel, cast iron and super-alloy
Stub Drill
M42COF Stub Drill
Stub length drill with straight shank, diameter 0.2570” (F) with an overall length of 2.5/8” and flute length of 1.7/16” according to ANSI standard with 135° split point, cobalt based HSS-E with bronze finish for 2.5xD drilling without pecking in steel, stainless steel, cast iron and super-alloy
Stub Drill
M41CON8 Stub Drill
Stub length drill with straight shank, diameter 0.1990” (N8) with an overall length of 2.1/4” and flute length of 1.3/16” according to ANSI standard with 135° split point, cobalt based HSS-E with bronze finish for 2.5xD drilling without pecking in steel, stainless steel, cast iron and super-alloy
Stub Drill
M42COH Stub Drill
Stub length drill with straight shank, diameter 0.2660” (H) with an overall length of 2.11/16” and flute length of 1.1/2” according to ANSI standard with 135° split point, cobalt based HSS-E with bronze finish for 2.5xD drilling without pecking in steel, stainless steel, cast iron and super-alloy
Stub Drill
M40CO9/64 Stub Drill
Stub length drill with straight shank, diameter 0.1406” (9/64) with an overall length of 1.15/16” and flute length of 15/16” according to ANSI standard with 135° split point, cobalt based HSS-E with bronze finish for 2.5xD drilling without pecking in steel, stainless steel, cast iron and super-alloy
Stub Drill
