GGIR 16D 03R 1.97-1.30 Turning Toolholder - Axial Grooving Imperial

Item Specifications

• Box height millimeter
  50
• Box length millimeter
  172
• Box width millimeter
  50
• Clamping Type Code (MTP)
  System G
• Country of origin
  Czech Republic
• Cutting depth maximum - inch (CDX)
  0.433
• Cutting width - inch (CW)
  0.118
• Functional height - inch (HF)
  1
• Gross weight - grams
  771
• H - Hardened materials(any engineering metal with a hardness > 45HRC)
  Primary use
• K - Cast Iron(castings of iron and carbon alloys with > 2% carbon content)
  Primary use
• M - Stainless steel(corrosion resistant steels with = 11% chromium content)
  Primary use
• Material Application Priority
  H - Hardened materials(any engineering metal with a hardness &gt
• Material Application Priority
  45HRC), K - Cast Iron(castings of iron and carbon alloys with &gt
• Material Application Priority
  2% carbon content), M - Stainless steel(corrosion resistant steels with = 11% chromium content), N - Non-ferrous metals(metals including alloys without an appreciable amount of iron), P - Steel and cast steel(steels with alloy content = 10% and a hardness of &lt
• Material Application Priority
  45HRC), S - High-temperature alloys(superalloys with high temperature stength and corrosion resistant surpassing that of stainless steel)
• Maximum axial groove outside diameter - inch (DAXX)
  1.97
• Minimum axial groove outside diameter - inch (DAXN)
  1.3
• N - Non-ferrous metals(metals including alloys without an appreciable amount of iron)
  Primary use
• P - Steel and cast steel(steels with alloy content = 10% and a hardness of < 45HRC)
  Primary use
• Product measurement standard
  Inch
• Product short description
  Turning Toolholder - Axial Grooving Imperial
• Shank height - inch (H)
  1
• Shank width - inch (B)
  1